Figure 6.10: Cutout for Nexus
To mount the P60N, cut an opening in the mounting panel. Follow above cutout dimensions.
Carefully "drop in" the P60N with bezel and gasket attached. See the above figure for details.
Fasten the unit securely with the eight nuts supplied with the display.
6.5: Daisy Chain Meters with the P60N
Data from up to 8 meters can be accessed with one P60N Display using the steps below:
1. Connect up to 8 meters to one P60N as shown in Figure 6.11 below.
2. Using the P60N face, touch the SETTINGS Button > NEXT > LINK SETTINGS.
3. Touch UP (on the LINK SETTINGS screen) to add an Address. Each slave device in the chain
MUST be assigned a UNIQUE ADDRESS. A SAVE Button will appear.
4. Touch the SAVE Button to Save the New Address.
5. Select the Address for the meter from which you want to access data.
Chapter 10 details the screens and the Navigational Map for the P60N Display.
6. Click NEXT to select a screen from which you want to retrieve data.
Figure 6.11: Daisy Chain Meters with the P60N Touch Screen Display
e
Electro Industries/GaugeTech
®
P60N Touch Screen Display
Doc # E151701
6-9