Electro Industries Nexus 1262 Installation & Operation Manual page 42

Billing meters
Table of Contents

Advertisement

NOTES:
• Settings on this screen control the display of energy related numbers. Care should be given to
match the values on the display with those in the historical logs. These settings apply to VA-hours,
watt-hours(+/-), VAR-hours (+/-) and VAR-hours (each quadrant) in the meter.
• This Number of Digits setting controls the display and storage of all digits displayed on the
screen, and it sets the Register Rollover for all energy-type registers.
6. Click the Miscellaneous tab. The
Screen settings replace Adjustments
Mode in the default Device profile.
. a. Enter settings in the Miscellaneous
screen:
Screen Settings:
Back Light Level: 0-Off to 4-
Brightest
Back Light Time (Back Light
shuts off): 00min, 30sec - 60min,
00sec
Contrast: 0 - Highest to 7 - Lowest
Scroll Stop: Enabled or Disabled
Phasor Rotation: Clockwise or
Counterclockwise
Demand Shown: Cumulative or Continuous Cumulative
Time of Use Demand:Block/Rolling or Cumulative
Date Format: Month/Day/Year or Day/Month/Year
Optical Port Settings:
Baud Rate: 1200, 2400, 4800, 9600, 19200, 38400 or 57600
Optical Receive: Non-Inverted or Inverted
User Inactivity Time Outs (number of minutes since last user action when Mode reverts to
View Mode 1) (Settings are 5 to 60 minutes with 1 minute intervals.):
Leave Test Mode After _ Minutes: Reverts with or without energy accumulation.
Leave View Mode 2 After _ Minutes: Reverts automatically.
Leave View Mode 3 After _ Minutes: Reverts automatically.
7. Use Buttons for Functions below:
Update Display: Click to send the new settings to the display.
(After settings have been updated, View Mode 1 is displayed.)
Retrieve from Display: Click to Retrieve existing settings.
Cancel: Click to Cancel any new settings, return to Communicator EXT Main screen.
Save: Click to Save new settings to a file.
9. When you have finished making any changes, click Update Display to send the new settings to
the display. Pop-up windows will tell you that the changes have been made and you will return
to the Communicator EXT Main screen.
e
Electro Industries/GaugeTech
Doc # E151701
3-8

Advertisement

Table of Contents
loading

This manual is also suitable for:

Nexus 1271

Table of Contents