The Test Button is one of two push buttons in the lower right hand quadrant of the meter face.
Press the Test Button (on the right).
The Select Transformer Loss screen appears on the display.
Press the Test Button again to scroll through the following Transformer Loss screens:
Transformer Loss Only
Both CTPT and Transformer Loss
No Compensation
CTPT Only
Exit - Do Not Enter Test Mode
Stop on the desired screen. Then, push the Test Button for 2 - 3 seconds.
The Test Mode screens appear, unless you selected Exit.
"Test" will now appear in the upper right corner of the display.
Upon entering Test Mode:
1. All energy, demand and TOU values are stored in the meter's nonvolatile memory.
2. Meter log recording is suspended, except for historical logging, which continues. Entries
to the historical logs during testing, will reflect that Test Mode was in effect.
e
Electro Industries/GaugeTech
Doc # E151701
4-3