Programming A Securemail Transmission - Muratec F-100 Operating Instructions Manual

Beyond the basics
2
Select the key in which you want to program a command or change a previ-
ously stored command — if necessary, turn the fliptab to see it, as described
earlier — and then press it. Here, we've selected
Select Program No.
3
If you change your mind and wish to select a different programmable one-
touch key, go back to step 2 before going on to step 4.
4
Press . The now shows either
ENTER LCD
P06:Fax Number
_
5
Use the numeric keypad to enter up to 20 fax numbers — any combination of
call groups, other one-touch keys, speed-dial numbers and numbers you enter
with only the numeric keypad.
Important: Do not press
Between each number or call group, press
Important: Do not insert a comma after the last number.
To enter a speed-dial number, press
three-digit identifier.
To enter a call group, press
P06: Fax Number
Your display can show only 20 characters at a time. To view characters beyond
those 20 (such as with an international long-distance number), press
scroll leftward or /
PROGRAM
Note: If you make a mistake or want to erase characters entered in a previ-
ous setting, press
just one character in the number, press
or / to move it rightward, to that character. Then re-enter
PROGRAM
until the number is just as you want it.
6
If you want the broadcast to begin immediately every time you press the key,
press and skip to step 9.
ENTER
If you want to delay the broadcast (perhaps to take advantage of lower phone
rates), press
COMMUNICATION OPTIONS
2.38
06.
P
P06:Fax Number
or
9-5558743_
.
ENTER
to enter a comma
BROADCAST
/ and the number's
SPEED DIAL TEL INDEX
and the group's identifier number.
GROUP DIAL
to scroll rightward.
to erase leftward. Or, if you want to change
CANCEL
to move the cursor leftward,
, .
ENTER
7
There's a choice to make. Instruct your fax to carry out this delayed command
in one of the following ways:
Option 1: Perform the command once at a certain time on a certain day of
the month. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter the date
and time when the fax should perform the command:
Option 2: Perform the command at a certain time each day you press the
key. (For example, "Do this at 5:05
To select this option, use the numeric keypad to enter 0, 0 (i. e.,
00), and then the time when the fax could perform the command:
8
Press ,
ENTER ENTER
9
The now displays the next programmable one-touch key.
LCD
If you do not wish to enter or change any other key's programming, press
to return your machine to its usual standby mode.
If you do wish to enter or change this key's programming, go back to step 3.
If you wish to enter or change another key's programming, go back to step 2.

Programming a SecureMail transmission

Note: To erase a programmable one-touch key, refer to page 2.43.
to
Note: For this operation to work, three things must be true:
• The remote fax machine must be a Muratec fax machine (other than an
F-76, F-85 or F-86) with SecureMail reception capability.
• The SecureMail mailbox into which you're faxing must exist on the
remote machine.
• You must know the mailbox's one-digit mailbox number.
Delayed
PM
Delayed
.
on the 30th.")
PM
today.")
STOP