Attaching A Second Phone; Attaching An Optional Handset - Muratec F-100 Operating Instructions Manual

2
If the volume you hear is satisfactory, skip to step 4. Otherwise, go on to step 3.
3
Adjust the volume as you wish:
To turn the volume up, press /
The display, or , indicates the volume. Here are the possible settings:
LCD
** Tel Mode **
n n
n n
Volume:
n n
** Tel Mode **
n n
Volume:
n n
** Tel Mode **
Volume:
n n
** Tel Mode **
Volume:
4
Press / again to hang up.
MONITOR CALL

Attaching a second phone

Want to attach a second phone (even a cordless model!) to your fax machine, so they
can share the same phone jack? No problem.
Before we go further, let's explain the idea. You're plugging the second phone's
phone line into your fax machine's
EXT
setup, only your fax machine connects to the wall. The second phone receives phone
signals through your fax machine.
Now, let's proceed ...
1
If your second phone is already plugged into a wall phone jack, disconnect it
from that jack, at the jack. Hold onto the phone plug; you'll need it in step 2.
Note: Of course, if your second phone is a model which also requires
power, as is true for the base of a cordless phone, don't unplug it from
its power jack!
AC
. To turn the volume down, press .
PROGRAM
= Loudest setting.
= Medium setting.
= Low setting.
= Volume off.
. jack, not the wall phone jack. In such a
TEL
2
Using the plug mentioned in step 1,
plug the phone cable from your
second phone into the
on the rear of your fax machine.
For information on how to use a connected
second phone with your fax machine, see
"Receiving faxes," beginning on page 1.18.

Attaching an optional handset

If you purchase an optional handset for your fax machine, it comes with installation
instructions. However, here is a summary of how to attach the handset.
Important: Do not connect the handset directly to a telephone wall jack. Connect
the handset only to your fax machine as the instructions describe.
1
Using a small Phillips-head screwdriver, attach the handset cradle to the side
of your fax machine using the screws included with the cradle.
2
Plug one end of the handset cord (it's curled) into the
jack on the rear of your fax machine.
HANDSET
3
Plug the other end of the handset cord into the jack on the handset. If con-
nected to a phone line, your fax machine is now "off-hook."
Note: The handset has a small "flash" button which you can press while
holding the handset, putting the fax machine back "on-hook" until you
can hang up the handset properly in step 4.
4
Place the telephone handset onto the handset cradle. The cradle will press
the handset's "flash" button, hanging up the handset.
Installation complete!
AC
Now, see how our EasyStart feature will have
you up and running — within just minutes.
. jack
EXT TEL
Getting started
LINE EXT.TEL HANDSET
1.9