Erasing a document stored in a batch box
It's easy to erase a document stored in a batch box set up on your fax machine:
1
Press /
,
, 6,
PROGRAM
N
ENTER
Erase Batch Doc.
Enter Box No.
2
Use the numeric keypad to enter the number (1–5) of the batch box currently
"holding" the document you wish to erase.
3
Press
. The
will show:
ENTER
LCD
Erase Batch Doc.
Enter File No.
4
Use the numeric keypad to enter the document's two-digit file number (00–39).
If the file number is 00–09, be sure to enter the leading zero.
5
Press
. The fax machine now gives you one last chance to change your
ENTER
mind about the erasure.
Erase Batch Doc.
Check Program/Enter
Important: To quit the operation without erasing this particular document,
press /
PROGRAM
Important: To quit the operation without erasing this or any other docu-
ment, press
STOP
6
Press
. The fax machine will erase the desired document, then return to
ENTER
standby mode.
. The
will show:
LCD
_
_
and go back to step 4.
. The machine will return to standby mode.
Beyond the basics
2.27