The Time Machine: Delayed Transmission; Setting Up A Delayed Transmission - Muratec F-100 Operating Instructions Manual

Plain-paper fax machines
Hide thumbs Also See for F-100:
Table of Contents

Advertisement

The time machine: delayed transmission

Take advantage of lower evening and weekend long-distance rates with delayed
transmission. Your fax machine can store up to 99 delayed transmission commands,
each of which you can program up to 31 days in advance.
Important: If you program a full 99 delayed transmission commands, no further
memory transmission is possible until the machine performs at least
one of the delayed commands. (To review memory transmission, see
pages 1.14–1.15.) However, you always can transmit from the feeder by
using on-hook dialing or an optional handset (see page 1.16).

Setting up a delayed transmission

Important: Your machine remembers only the day of the month, not the month
itself, when it's supposed to perform a delayed transmission. So if,
say, you want your fax to do something at 5:05
make that setting sooner than 5:06
To set up a delayed transmission:
1
Insert the document and make any necessary adjustments as usual.
2
Press
COMMUNICATION OPTIONS
1.Delayed
3
Press
. The
shows the current day of the month, followed by the
ENTER
LCD
current time (in 24-hour format, as you'll recall):
Delayed
4
Use the numeric keypad to enter the day of the month and the time when you
want the fax to perform the delayed transmission.
Note: To move the cursor to a specific digit, press
ward, or /
PROGRAM
Here, we've set the transmission to occur on the 11th at 11:05
Delayed
on June 26, don't
PM
on May 26.
PM
. The
will show:
LCD
to move the cursor left-
to move it rightward, to that digit.
PM
5
When the date and time entry is as you wish, press
transmission. The
Enter Fax Number
_
6
Enter the fax number to which the delayed transmission should go. You may
either press a one-touch key, enter a speed-dial number or just use the
numeric keypad normally.
Note: If you make a mistake or want to erase characters entered in a previ-
ous setting, press
just one character in the number, press
or /
until the number is just as you want it.
7
Press
START
showing this on the
** Reserved **
This means your fax machine is "reserved" for the delayed transmission com-
mand you just programmed.
If you had set the machine for transmission from memory, it will scan the
document into memory, after which you can use the machine normally.
If you had set the machine for transmission from the feeder, the machine can
receive faxes but can't transmit.
:
shows:
LCD
to erase leftward. Or, if you want to change
CANCEL
to move it rightward, to that character. Then re-enter
PROGRAM
. Your machine will return to its normal standby mode, while
:
LCD
Beyond the basics
to save the delayed
ENTER
to move the cursor leftward,
2.21

Advertisement

Table of Contents
loading

This manual is also suitable for:

F-120F-150

Table of Contents