Group Dialling (For Multi-Address Transmission) - Muratec F-110 Operating Instructions Manual

All manuals and user guides at all-guides.com
Group Dialling
Multiple one-touch and speed dial numbers can be registered as a group.
By using the group number, you can send a document to multiple parties
in a single operation. The machine will dial the remote numbers in stored
sequence. If the number is busy, the machine will dial the next stored
number. After dialing all of the stored numbers, the unit will
automatically redial any number that was busy. Before you can use this
feature, you must program the group numbers desired.
Storing One-Touch or Speed Dial Numbers for Group
Dialing
1. Press SET UP on the front panel.
The display shows the first menu; FAX NUMBER/NAME.
2. Press ➛ or ❿ until 'GROUP DIAL SETUP' appears, and press
START/ENTER.
3. Press one of the 20 one-touch buttons that you want to use for group
dial.
4. The display asks you to confirm that you use this button for group
dialing.
Press START/ENTER to confirm.
If you do not want to use the one-touch number, press STOP. Then,
press another one-touch button.
Note: If the button you chose has already been used for one-touch
dialing , the display will warn of the duplication.
Then you are allowed to select 'OTHER' or 'RENEW' by pressing ➛
or ❿. To replace that number and continue, select RENEW and to
start over with a different location, select OTHER. When the
desired option is displayed, press START/ENTER.
(for Multi-Address Transmission)
GROUP NO.: T15
T15 USED !
3.41
Stand-alone Fax