Fujitsu Primergy RX100 S3 User Manual page 36

Chapter 1 Overview
3
Place the CD-ROM at the center of the tray.
While supporting the CD-ROM tray, push the tray until it clicks into position.
4
Move the tray back.
Push the tray gently until it clicks into position.
■ Ejecting the CD-ROM
To eject the CD-ROM, press the CD-ROM eject button (EJECT) in the same way as steps 1 to 2 in
■
" Inserting the CD-ROM" ( pg.35).
36
Label side up
CD-ROM tray
If the CD-ROM is placed improperly when the tray is pushed into the unit, the CD-ROM or the
drive may be damaged.
Be careful not to touch the lens of the CD-ROM drive.
CD-ROM tray