Adapter Properties - Fujitsu Primergy RX100 S3 User Manual

8.2.5 Adapter Properties

Detailed configuration information of SCSI adapters on the SCSI bus is set. Press the [F2] key from the
[Main] menu window, select [Adapter] and press the [Enter] key to display the window.
LSI Logic MPT SCSI Setup Utility Version MPT BIOS-IME-x.xx.xx
Adapter Properties
Adaapter PCI
Bus
1020/1030 2
1020/1030 2
<Device Properties>
<RAID Properties><Synchronize Whole Mirror>
Host SCSI ID
SCSI Bus Scan Order
Removable Media Support
CHS Mapping
Spinup Delay(Secs)
Secondary Cluster Server
Termination Control
<Restore Defaults>
F1 =HELP
Esc=Abort/Exit
Item
Device Properties
RAID Properties
Host SCSI ID
SCSI Bus Scan Order
Removable Media Support
CHS Mapping
Spinup Delay (Secs)
Secondary Cluster Server
Termination Control
Restore Defaults
DEV/
Func
40
41
[ 7]
[Low to High(0..Max)]
[None]
[SCSI Plug and Play Mapping]
[ 2]
[No]
[Auto]
ArrowKeys=Select Item
Home/End=Select Item
table: Items on the Adapter Properties Window
Setting
■
Displays " Device Properties Submenu" ( pg.228) window. Configures settings
on device options.
■
Displays " RAID Properties Submenu" ( pg.228) window. Configures settings
on the array system with onboard SCSI controller.
7 (Unchangeable)
Low to High (0..Max)
(Unchangeable)
None (Unchangeable)
SCSI Plug and Play
Mapping (Unchangeable)
• 2 (Initial value)
• 1–15
No (Unchangeable)
Auto (Unchangeable)
Reads default values for the controller.
PRIMERGY RX100 S3 User's Guide
-/+ =Change [Item]
Enter=Excute <Item>
Description
Specifies the SCSI ID of the SCSI controller.
Specifies the SCSI device scan order during the
startup.
Sets whether or not the SCSI Setup Utility supports
removable disk units such as MO drives.
Specifies the mapping method of CHS information.
Specifies the boot interval of devices.
Sets whether to enable or disable the secondary
cluster server.
Sets SCSI bus termination.
8
227