Fujitsu Primergy RX100 S3 User Manual page 123

2. When the "Please insert the disk labeled Manufacturer-supplied hardware support
disk into Drive A:" message appears, insert the driver disk created and press the
[Enter] key.
The following message appears.
You have chosen to configure a SCSI Adapter for use with
Windows 2000, using a device support disk provided by an
adapter manufacturer.
Select the SCSI Adapter you want from the following list,
or press ESC to return to the
previous screen.
3. Select following item and press the [Enter] key.
LSI Logic PCI SCSI/FC MPI Miniport Driver
4. When the following message appears, press the [S] key.
The driver you provided seems to be newer than the Windows
default driver. Windows already has a driver that you can
use for "LSI MEGARAID Products for Windows 2000"(or "LSI
Logic PCI SCSI/FC MPI Miniport Driver) Unless the device
on the floppy disk, you should use the driver in Windows.
5. Follow the instructions in the window to perform installation
The message which prompts you to set the floppy disk appears during the installation, set
the driver disk and push the [Enter] key.
7
Follow the instructions from the setup program to continue the installation
procedures.
Cautions on Restarting
In the course of installation, a message appears to indicate that the setup program restarts.
Wait until it restarts automatically.
8
Install the LAN driver.
Install the LAN driver using the driver disk created from the ServerStart CD-ROM. For more
details, refer to "4.3 Installing the LAN Driver" ( pg.127).
9
Install the LAN driver advanced set up tool.
For information about onboard LAN driver advanced setup tool, refer to "5.6.1 BACS
Installation" ( pg.157). For information about LAN card advanced setup tool, refer to "5.7.1
Intel® PROSet Installation" ( pg.165).
10
Install the GEM318 driver.
1. Insert the ServerStart Disc 1 CD-ROM into the drive of the server.
When the ServerStart window appears, exit ServerStart.
2. Right-click the [My Computer] icon on the desktop and click [Manage] from the
displayed menu.
3. Click [Device Manager] from the displayed list.
PRIMERGY RX100 S3 User's Guide
4
123