How To Install The Internal Cd-Rom Drive Unit - Fujitsu Primergy RX100 S3 User Manual

7.5.2 How to Install the Internal CD-ROM Drive Unit

The DVD-ROM drive unit package includes parts which are not used for drive installation.
1
Turn off the power and remove the top cover.
"7.2 Removing and Attaching the Top Cover" (pg.178)
2
Touch a metal part of the server to discharge static electricity.
3
Loosen the screws of the dummy unit, and remove the dummy unit.
Slide the dummy unit backward and lift it up.
Be sure to keep the removed dummy units for later use.
Dummy unit
4
Install the CD-ROM drive unit.
Insert the stopper latches of the CD-ROM drive unit into slots of the server.
PRIMERGY RX100 S3 User's Guide
Screw
7
193