Fujitsu Primergy RX100 S3 User Manual page 137

■ Paging File Setting
Set up the paging file according to the following procedures:
1
Log on to the server with administrator privileges.
2
Check free space of the drive where the system is installed.
Check the required amount of free space according to "
( pg.134).
If the drive has no free space, refer to "
3
Click [Start] → [Control Panel] → [System].
The [System Properties] window appears.
4
Click the [Advanced] tab and click [Settings] in [Performance].
The [Performance Options] window appears.
5
Click the [Advanced] tab.
PRIMERGY RX100 S3 User's Guide
■
Checking Hard Disk Free Space"
■
Cannot Collect the Memory Dump" ( pg.250).
5
137