Start Menu-Connect-Modem - Panasonic KX-TDA50 Pc Programming Manual

Connection Settings for LAN
Setting
Port Number
2.2.6 Start Menu—Connect—Modem
Connects to the PBX in Interactive mode through the modem.
To access the PBX remotely using this feature, an RMT card must be installed and the Remote—
Analog Remote (Modem) Floating Extension Number assigned in 2.18.1 [11-1] Main.
This option allows direct entry of connection parameters, for cases where the PC is used to connect
to one or just a few PBXs, and an individual profile for each PBX is not necessary. If you connect to
multiple PBXs and would prefer to choose from among pre-saved profiles instead, see 2.2.7 Start
Menu—Connect—Profile Setup for more details about creating profiles.
To connect to the PBX by Modem
1.
From the start menu, select Connect.
The Login window will be displayed.
2.
Select a connection option.
• Select a Profile Name if you want to use a pre-saved profile.
a.
b.
• To enter the parameters manually, select the PBX Model and confirm that the Modem radio
button is selected.
a.
b.
3.
Click Connect.
Connection Settings for Modem
Setting
Dial Number
Dial Type
Values
10000–65535
Select the profile to use from the drop-down list.
If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be
entered.
Specify the settings as required. For more details, see the table below.
Enter the system password for the PBX.
Values
1-9, 0, *, #, -, ","
[comma], T, P, W
Auto(Tone),
Auto(Pulse), Manual
Explanation
Specify the port number used to access the
PBX via LAN. Enter the same port number that
was input in Maintenance Port Number of
2.8.28 [1-1] Slot—Card Property - CTILINK
(KX-TDA100/KX-TDA200/KX-TDA600 only)
or 2.8.19 [1-1] Slot—Card Property - IP
Gateway (KX-TDA50 only).
Description
Enter the telephone number to be dialed to
access the PBX.
T: Converts the Dial Type from Pulse to Tone.
"," [comma], P, W: Inserts a pause.
Specify the outgoing dialing method.
If Manual is chosen, dialing must be done with
a connected telephone.
PC Programming Manual
2.2 Start Menu
33