Panasonic KX-TDA50 Pc Programming Manual page 181

Maintenance Console Location
2.8.19 [1-1] Slot—Card Property - IP Gateway
Programming Manual References
2.9.4 [2-3] Timers & Counters—Dial / IRNA / Recall / Tone—Dial—Extension Inter-digit
2.9.17 [2-9] System Options—Option 2—End of Dial Plan—[#] as End of Dial for en Bloc mode (KX-
TDA100/KX-TDA200/KX-TDA600 only)
2.10.4 [3-1-4] Dialing Plan
Feature Manual References
1.13.23 Private Network Features—VoIP (Voice over Internet Protocol)
QSIG-CT
Enables a call to be transferred to a destination extension at another PBX in a QSIG network.
Default
Yes
Value Range
Yes, No
Maintenance Console Location
2.8.19 [1-1] Slot—Card Property - IP Gateway
Programming Manual References
None
Feature Manual References
1.13.22 Private Network Features—QSIG—CT (Call Transfer)
QSIG-CF
Enables a call to be forwarded to a destination extension at another PBX in a QSIG network.
When using the Centralized VM feature, set this to "No".
Default
Yes
Value Range
Yes, No
Maintenance Console Location
2.8.19 [1-1] Slot—Card Property - IP Gateway
Programming Manual References
None
2.8 [1] Configuration
PC Programming Manual 181