Panasonic KX-TDA50 Pc Programming Manual page 641

Programming Manual References
2.9.5 [2-4] Week Table
Feature Manual References
1.4.6 DIL (Direct In Line)
1.17.3 Tenant Service
1.17.5 Time Service
VM Trunk Group No.
Specifies the number of the VM trunk group sent to the VPS when the DIL destination is the floating
extension number of a VM (DPT) Group.
The VM trunk group number is used to allow the VPS to send the applicable greeting message to the
caller.
Default
1
Value Range
1–48
Maintenance Console Location
2.17.2 [10-2] DIL Table & Port Settings
Programming Manual References
None
Feature Manual References
1.4.6 DIL (Direct In Line)
1.19.4 Voice Mail DPT (Digital) Integration
CLI for DIL
When CLI distribution is enabled for a CO line to which DIL distribution is set, incoming CO line calls
will be distributed to the CLI destinations (instead of the DIL destinations) if the caller's identification
number is found in the System Speed Dialing Table.
CLI distribution can be enabled or disabled for each time mode (day/lunch/break/night) on a CO line
basis.
Shelf (KX-TDA600 only)
Indicates the shelf position (reference only).
Default
Current shelf number
Value Range
Shelf number
2.17 [10] CO & Incoming Call
PC Programming Manual 641