Panasonic KX-TDA50 Pc Programming Manual page 609

Feature Manual References
1.1.3 ARS (Automatic Route Selection)
1.17.3 Tenant Service
System Speed Dial
Specifies which system speed dialing table is used by the tenant. This setting is only available when
an MEC (KX-TDA50/KX-TDA100/KX-TDA200) or EMEC (KX-TDA600) card is installed.
Default
For KX-TDA50:
Basic Memory
For KX-TDA100/KX-TDA200/KX-TDA600:
Same as System Setting
Value Range
For KX-TDA50:
Basic Memory: PBX basic system speed dialing numbers are used.
Expanded Memory: Expansion system speed dialing numbers are used.
For KX-TDA100/KX-TDA200/KX-TDA600:
Same as System Setting: PBX common system speed dialing numbers are used.
Tenant Exclusive: Individual tenant system speed dialing numbers are used.
Maintenance Console Location
2.13.6 [6-6] Tenant
Programming Manual References
2.13.1 [6-1] System Speed Dial
Feature Manual References
1.16.4 Speed Dialing, System
1.17.3 Tenant Service
2.13 [6] Feature
PC Programming Manual 609