Panasonic KX-TDA50 Pc Programming Manual page 173

Value Range
DTMF, Pulse
Maintenance Console Location
2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.4.2 Dial Mode Selection
Channel Type
Selects the channel type.
Default
Undefined
Value Range
Undefined: Not assigned
GCOT: Ground Start Central Office
LCOT: Loop Start Central Office
DID: Direct Inward Dialing
TIE (E & M): TIE Line
OPX: Off Premise Extension
Maintenance Console Location
2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Manual References
1.17.1 T1 Line Service
Trunk Property
Selects the CO line property of the TIE channel.
Default
Private
Value Range
Public: Use the DIL/DID method to distribute incoming CO line calls.
Private: Use the TIE line service between two or more PBXs.
2.8 [1] Configuration
PC Programming Manual 173