Panasonic KX-TDA50 Pc Programming Manual page 19

Connection Settings for RS-232C
Setting
Port
Baud Rate (bps)
Connection Settings for Modem
Setting
Dial Number
Dial Type
Comment
Port
Baud Rate (bps)
Modem Initialize
Connection Settings for LAN
Setting
IP Address
Port Number
Values
COMx
2400, 4800, 9600,
19200, 38400, 57600,
115200
Values
1-9, 0, *, #, -, ","
[comma], T, P, W
Auto(Tone),
Auto(Pulse), Manual
Max. 40 characters
COMx
1200, 2400, 4800, 9600,
19200, 38400
–
Values
1.0.0.0–
223.255.255.255
10000–65535
Explanation
Specify the number of the COM port assigned
to the PC's RS-232C interface. Only available
COM ports are displayed.
Specify the speed of data transmission.
Explanation
Enter the telephone number to be dialed to
access the PBX.
T: Converts the Dial Type from Pulse to Tone.
"," [comma], P, W: Inserts a pause.
Specify the outgoing dialing method.
If Manual is chosen, dialing must be done with
a connected telephone.
Enter a comment to identify the set of values.
Specify the number of the COM port assigned
to the PC's modem interface.
Only available COM ports will be displayed.
Specify the speed of data transmission.
Enter the modem initialize command, and click
Initialize to send the command to the modem.
For more details, refer to your modem's
instruction manual.
Explanation
Specify the IP address of the PBX on the LAN.
Enter the same IP address that was input in IP
Address of 2.8.28 [1-1] Slot—Card Property
- CTILINK (KX-TDA100/KX-TDA200/KX-
TDA600 only).
Specify the port number used to access the
PBX via LAN. Enter the same port number that
was input in Maintenance Port Number of
2.8.28 [1-1] Slot—Card Property - CTILINK
(KX-TDA100/KX-TDA200/KX-TDA600 only)
or 2.8.19 [1-1] Slot—Card Property - IP
Gateway (KX-TDA50 only).
PC Programming Manual
2.1 Introduction
19