Panasonic KX-TDA50 Pc Programming Manual page 14

1.2 PC Programming
Notice
1.
During a long programming session, it is highly recommended that you periodically save the
system data to the SD Memory Card. If the PBX undergoes a sudden power failure or if the
system is reset for some reason, all the system data in RAM will be lost. However, if system
data has been saved to the SD Memory Card, it can be easily restored.
14 PC Programming Manual
4. a.
Enter the Installer Level Programmer Code (default:
INSTALLER).
The Programmer Code authorizes different
programming levels, and the Quick Setup is only
available when you start the Maintenance Console
with the Installer Level Programmer Code.
Note
There are 2 other Programmer Codes with limited
authorization: Administrator Level (default: ADMIN),
and User Level (default: USER). (→ 1.2.2 Password
Security)
b.
Click OK.
5. Click Connect.
6. a.
Select the USB tab.
b.
Enter the system password for installer (default:
1234).
c.
Click Connect.
Note
To connect to the PBX via USB, the KX-TDA USB
driver must be installed on the PC, as explained above
in "Installing the Maintenance Console".
7. Follow the instructions of the Quick Setup wizard and
assign the basic items.
The system menu appears. You may now begin
programming the PBX.