Panasonic KX-TDA50 Pc Programming Manual page 579

Maintenance Console Location
2.12.3 [5-3-1] Voice Message—DISA System
Programming Manual References
None
Feature Manual References
None
CO-CO with DISA—DISA to Public CO
Specifies whether the DISA port of the message card is released when a CO-to-CO line call using
DISA is established. To enable this setting, "CO-CO with DISA—Fwd/Transfer to Public CO" on this
screen should be set to "Enable".
Setting this to "Disable" will free up DISA ports faster, but prevent DISA being used to detect the end
of a call and disconnect the CO line quickly.
Default
Enable
Value Range
Disable (Release DISA): The DISA port of the message card is released when a CO-to-CO line call
using DISA is established.
Enable: DISA stays connected for the duration of the call, to allow detection of the end of the call.
Maintenance Console Location
2.12.3 [5-3-1] Voice Message—DISA System
Programming Manual References
2.12.3 [5-3-1] Voice Message—DISA System—Option 1—CO-CO with DISA—Fwd/Transfer to Public
CO
Feature Manual References
None
CO-CO with DISA—DISA to Private Network
Specifies whether the DISA port of the message card is released when a CO-to-TIE line call using
DISA is established.
To enable this setting, "CO-CO with DISA—Fwd/Transfer to Private Network" on this screen should
be set to "Enable".
Setting this to "Disable" will free up DISA ports faster, but prevent DISA being used to detect the end
of a call and disconnect the CO line quickly.
Default
Disable (Release DISA)
2.12 [5] Optional Device
PC Programming Manual 579