2.8 [1] Configuration
Feature Manual References
1.3.1 Caller ID
Caller ID—Max Receive Time
Specifies the maximum number of Caller ID series that are sent from the network.
Default
1
Value Range
0 (no limit), 1, 2, 3
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Caller ID—Caller ID (FSK) Carrier Detection
Enables the PBX to detect the carrier when receiving Caller ID. To enable this setting, Caller ID—
Caller ID Signaling on this screen should be set to FSK.
Default
Enable
Value Range
Disable, Enable
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Manual References
1.3.1 Caller ID
Caller ID—Caller ID (FSK) END Detection
Selects the method used to detect the end of Caller ID information.
Default
Length + Timer
112
PC Programming Manual