Start Menu-Connect-Rs-232C; Start Menu-Connect-Usb - Panasonic KX-TDA50 Pc Programming Manual

Enter a name for the new converted system file.
• Click No to open the file as it is.
2.2.3 Start Menu—Connect—RS-232C
Connects to the PBX in Interactive mode through the serial RS-232C interface of the PBX.
This option allows direct entry of connection parameters, for cases where the PC is used to connect
to one or just a few PBXs, and an individual profile for each PBX is not necessary. If you connect to
multiple PBXs and would prefer to choose from among pre-saved profiles instead, see 2.2.7 Start
Menu—Connect—Profile Setup for more details about creating profiles.
To connect to the PBX by RS-232C
1.
From the start menu, select Connect.
The Login window will be displayed.
2.
Select a connection option.
• Select a Profile Name if you want to use a pre-saved profile. This option is only available
when one or more profiles have been previously stored.
a.
b.
• To enter the parameters manually, select the PBX Model and confirm that the RS-232C
radio button is selected.
a.
b.
3.
Click Connect.
Connection Settings for RS-232C
Setting
Port
Baud Rate (bps)
2.2.4 Start Menu—Connect—USB
Connects to the PBX in Interactive mode through the USB port on the PBX, or a USB port (USB
Module) attached to a DPT.
To connect to the PBX by USB
1.
From the start menu, select Connect.
The Login window will be displayed.
Select the profile to use from the drop-down list.
If the system password for the PBX has not been stored with the profile, enter it.
If the system password has been stored with the selected profile, it does not need to be
entered.
Specify the settings as required. For more details, see the table below.
Enter the system password for the PBX.
Values
COMx
2400, 4800, 9600,
19200, 38400, 57600,
115200
Explanation
Specify the number of the COM port assigned
to the PC's RS-232C interface. Only available
COM ports are displayed.
Specify the speed of data transmission.
PC Programming Manual
2.2 Start Menu
31