Panasonic KX-TDA50 Pc Programming Manual page 64

2.6 Utility
KX-TDA100/KX-TDA200
File Name
PMPR_SUB
KX-TDA600
File Name
DLSYS
DLSYS_S
PLMPR
PLMPR_S
When new DSYS/DSSYS/DLSYS and PMPR/PSMPR/PLMPR files are transferred from a connected
PC to the SD memory card using the File Transfer PC to PBX (SD Card) utility (see 2.6.2 Utility—
File Transfer PC to PBX (SD Card)), they are stored as the backup files. To use these files on the
PBX, it is necessary to first swap them with the currently active files on the SD memory card.
Requirements
• This utility only functions on PBXs version 1.005 and later.
• On earlier versions, the reset request confirmation screen will be displayed, and files will not
be updated.
To update system files and reset the PBX
1.
From the Utility menu, point to System Reset and then click Reset by the Command.
2.
Choose whether to back up current system data or not.
• Click SD Backup to back up the current system data to the SD memory card before
proceeding.
Select this if you intend to use the current system data unchanged after reset.
• Click Skip to continue without backing up.
Select this if you intend to replace the current system data with data that was uploaded from
the PC.
The second screen will be displayed. A list of matching files found on the SD memory card, with
dates and times, is shown at the top.
3.
Select whether to replace the DSYS/DSSYS/DLSYS and PMPR/PSMPR/PLMPR files or not.
When no backup file is found, the corresponding options are not available.
4.
Click OK.
A confirmation screen will be displayed.
5.
Select an option:
• Click OK to reset the PBX.
If OK is clicked, a final confirmation screen will be displayed.
• Click Cancel to return to the main screen without copying files.
6.
Click OK to reset the PBX, or Cancel to return to the main screen without copying files.
64 PC Programming Manual
Description
Backup PBX program file
Description
Main system data file. Contains all of the current configuration data
for the PBX.
Backup main system data file
PBX program file. Contains the software to run the EMPR board of
the PBX.
Backup PBX program file