Utility-Sd Card File View And Load - Panasonic KX-TDA50 Pc Programming Manual

This option is only available at Installer level.
The files that can be downloaded from the SD memory card are as follows:
File Name
DSSYS (KX-TDA50)
DSYS (KX-TDA100/KX-TDA200)
DLSYS (KX-TDA600)
$SYSERR
$SYSERR1–$SYSERR9
DSKEYSD (KX-TDA50)
DKEYSD (KX-TDA100/KX-TDA200)
DLKEYSD (KX-TDA600)
Downloading the DSYS/DSSYS/DLSYS system data file allows you to make a backup of the
configuration of the PBX.
The error data files are snapshots of the configuration of the PBX taken automatically when a major
error causes a system reset. They can be analyzed by your dealer to identify the source of a problem.
If there is only one error data file, its name will be $SYSERR. If there is more than one file, the files
will be numbered in chronological order, up to a maximum of 9 files.
To transfer files to the PC
1.
From the Utility menu, select File Transfer PBX (SD Card) to PC.
2.
Select the file to download from the list of files on the SD memory card.
Only the files listed in the table above can be downloaded. Selecting any other file will cause an
error message to be displayed.
3.
Click Transfer.
The Save dialog box will be displayed.
4.
Navigate to the folder in which you want to save the file.
5.
Enter a file name.
6.
Click Save.
A window showing the download progress will be displayed.
A message will be displayed when the transfer is complete.
7.
Click OK.
2.6.4 Utility—SD Card File View and Load
Displays a list of files on the SD memory card, and allows you to update the programs stored in LPR
cards (cards with local processors) (KX-TDA100/KX-TDA200/KX-TDA600 only) and Cell Stations
(CSs).
This option is only available at Installer level.
To update the program stored in an LPR card (KX-TDA100/KX-TDA200/KX-TDA600 only), the card
must first be set to out of service (OUS). To update the program stored in a CS (T0141/TDA0142),
the port of the card (CSIF/DHLC/DLC) that the CS is attached to must be set to OUS, but the card
itself must be set to in service (INS). Only cards that are in the correct status will be displayed.
The name, date and time of creation, and size of files are displayed.
File Type
System Data
Error Data
Feature Access
PC Programming Manual
2.6 Utility
53