1-1] Slot-Card Property - Lco Type - Panasonic KX-TDA50 Pc Programming Manual

Maintenance Console Location
2.8.9 [1-1] Slot—Port Property - CSI/F Port—Connection Command (KX-TDA100/KX-TDA200/KX-
TDA600 only)
Programming Manual References
2.8.8 [1-1] Slot—Port Property - CSI/F Port (KX-TDA100/KX-TDA200/KX-TDA600 only)
Feature Manual References
None
2.8.10 [1-1] Slot—Card Property - LCO type
The properties of the analog CO line cards can be specified.
Outgoing Guard Time
Specifies the length of time after a CO line is disconnected, during which the PBX cannot seize the
line.
Default
3 s
Value Range
3–6 s
Maintenance Console Location
2.8.10 [1-1] Slot—Card Property - LCO type
Programming Manual References
None
Feature Manual References
None
First Dial Timer (CO)
Specifies the minimum time that the PBX waits after seizing a CO line, before sending the dialed digits
to the telephone company. This allows the telephone company to have enough time to accept the
dialed digits correctly.
Default
1.0 s
Value Range
0.5 × n (n=1–16) s
2.8 [1] Configuration
PC Programming Manual 105