Switch Select - GRAUPNER MX-12 Programming Manual

System Mode

Switch Select

Switch Select
The mx-12 allows the several options to be programmed
for the dual rate, gear and flap switches (flight mode
switches for heli).
Aileron and Elevator dual rates can be programmed to
be individually selected via its own switch (individ) or the
aileron, elevator and rudder functions can be combined
to operate from one of four switches.
The gear channel can be programmed to operate on
one of four switched or rockers or it can be inhibited,
helpful for some types of mixing. Plus the flap channel
(flight mode channel for heli) can be programmed to
operate from switches or levers.
Dual Rate indicator
Gear Indicator
Flap indicator (Flight mode indicator for heli)
Go to Wing Type menu for
Airplane (to Swashplate type
menu for Heli)
Go to Trainer menu
Select function
Accessing the Modulation Function (For Airplane)
Dual Rates
D/R INDIVID (default)
In this mode the aileron and elevator rates are inde-
pendently selected using the ELEV D/R and AILE D/R
switches.
Note: In this mode the rudder D/R is always in the 0
position and is not selectable. This is the default
setting.
40 System Mode
COM AILE
In this mode the aileron, elevator and rudder dual rates
are combined on the AILE D/R switch.
COM ELEV
In this mode the aileron, elevator and rudder dual rates
are combined on the ELEV D/R switch.
COM R-SW
In this mode the aileron, elevator and rudder dual rates
are combined on the upper right (flap) switch.
COM L-SW
In this mode the aileron, elevator and rudder dual rates
are combined on the upper left (gear) switch.
Gear Channel
LEFT SW (default)
The gear channel operates from the left upper (gear)
switch.
AILE D/R
The gear channel operates from the aileron dual rate
switch
ROCKER
The gear channel operates from the right rocker switch
and offers three positions.
INHIBIT
Switch selection
The gear channel is inhibited and is centered making it
useful as a slave channel for mixing.
Reset selection to Default
RIGHT SW
The gear channel operates from the right upper (flap)
switch.
Flap Channel
RIGHT SW (default)
The flap channel operates from the right upper (flap)
switch.
LEFT SW
The flap channel operates from the left upper (gear)
switch.
ELEV D/R
The flap channel operates from the elevator dual rate
switch.
FLAP LVR
The flap channel operates from the left flap lever and is
proportional.
Accessing the Modulation Function (For Helicopter)
Dual Rates
D/R INDIVID (default)
In this mode the aileron and elevator rates are inde-
pendently selected using the ELEV D/R and AILE D/R
switches.
Note: In this mode the rudder D/R is always in the 0
position and is not selectable. This is the default
setting.
COM AILE
In this mode the aileron, elevator and rudder dual rates
are combined on the AILE D/R switch.
COM ELEV
In this mode the aileron, elevator and rudder dual rates
are combined on the ELEV D/R switch.
COM R-SW
In this mode the aileron, elevator and rudder dual rates
are combined on the upper right (flap) switch.
COM L-SW
In this mode the aileron, elevator and rudder dual rates
are combined on the upper left (gear) switch.
Gear Channel
LEFT SW (default)
The gear channel operates from the left upper (gear)
switch.
AILE D/R
The gear channel operates from the aileron dual rate
switch.