Sensor Select - GRAUPNER mx-16 HOTT Programming Manual

SENSOR SELECT

When you select the desired menu line using the arrow
buttons  of the left or right-hand touch-key ...
TELEMETRY
SETTING & DATA VIEW
SENSOR SELECT
RF STATUS VIEW
VOICE TRIGGER
... and then briefly press the central SET
right-hand touch-key, the selected sub-menu opens:
SENSOR SELECT
RECEIVER
GENERAL MODULE
ELECTRIC AIR.MOD
VARIO MODULE
GPS
At this menu point you can determine separately for
each model memory which graphic displays are avail-
able for selection, and which are to be suppressed, as
described in the section starting on page 30 and the
previously described "SETTING & DATA VIEW" sub-
menu.
Once you have selected the appropriate line using the
arrow buttons  of the left or right-hand touch-key,
and then pressed the central SET button of the right-
hand touch-key, you can activate (
the displays for the corresponding sensors, e.g.:
150 Program description: Telemetry menu
RECEIVER
GENERAL MODULE
ELECTRIC AIR.MOD
VARIO MODULE
GPS
This choice is a requirement for superimposing the sen-
sor in the "VOICE TRIGGER" sub-menu, and for display-
ing telemetry data in the corresponding graphic display;
button of the
see page 30.
) or disable ( )
SENSOR SELECT