Rr016 - Remove And Replace Incompatible Robot - Dell PowerVault ML6000 Maintenance Manual
Tape library
Hide thumbs
Also See for PowerVault ML6000:
- Reference manual (156 pages) ,
- Getting started manual (134 pages) ,
- User manual (122 pages)
Table of Contents
Advertisement
3
You have three options:
a. Select Close to close the ticket now.
b. Select Exit to leave the ticket open for future troubleshooting.
c. Select Back to return to the Diagnostic Resolution.
RR016 - Remove and Replace Incompatible Robot
This DR provides customer resolution steps for
Problem: The library firmware has detected that an incompatible robot has been installed. This problem
occurs when a robot assembly has been replaced with an incorrect type.
1
Replace the installed robot assembly with the required, originally installed, robot assembly model type.
2
You have three options:
a. Select Close to close the ticket now.
b. Select Exit to leave the ticket open for future troubleshooting.
c. Select Back to return to the Diagnostic Resolution.
RR017 - Remove and Replace Un-calibrated Picker
This RR provides resolution steps for
Problem: The library is unable to read the picker calibration offsets from the EEPROM/FLASH location.
1
Close this ticket and open/close the main door to have the library attempt another calibration.
2
If the problem still persists, contact Service to arrange for a replacement of the Picker Assembly.
3
You have three options:
a. Select Close to close the ticket now.
b. Select Exit to leave the ticket open for future troubleshooting.
c. Select Back to return to the Diagnostic Resolution.
RR018 - Remove and Replace Robotics Y-Carriage Assembly
This RR provides resolution steps for
Problem: The robot assembly is unable to properly move in the y-axis due to a degradation of the Y-axis
gear.
1
Contact Service to arrange for the replacement of the Y-carriage assembly of the robot assembly.
2
You have three options:
a. Select Close to close the ticket now.
b. Select Exit to leave the ticket open for future troubleshooting.
c. Select Back to return to the Diagnostic Resolution.
RR019 - Remove and Replace Unlabeled Tape Cartridge
This RR provides resolution steps for
PowerVault ML6000 Maintenance Guide
T128
on page 327.
T141
on page 340.
T142
on page 341.
T143
on page 342.
425
Advertisement
Table of Contents
