Dell PowerVault ML6000 Maintenance Manual page 141

Tape library

Hide thumbs Also See for PowerVault ML6000:

Table of Contents

Install the right rack ear. At the front of the library:

a. Open the I/E station door. At the lower right corner of the module is a vertical slot. Insert the

hinge of the right rack ear into the slot, and then position the holes of the rack ear flush with the

Hinge of rack ears

b. Using two M5 thumbscrews, fasten the rack ear to the rack. The thumbscrews should thread

through the nut clips (or cage nuts) and fasten completely and evenly.

PowerVault ML6000 Maintenance Guide