T107 - Dell PowerVault ML6000 Maintenance Manual

T107

T107 - FC I/O Blade Autolevel Failure
Description
Detection Scenarios
Root Causes
Service Resolution
Steps
Possible CRUs/FRUs
308
GUI Description: The FC I/O blade failed to autolevel to the proper firmware.
Explanation: Each FC I/O blade has its own firmware image. A copy of the
latest revision of that firmware is stored on the compact flash of the LCB. If the
version stored on the compact flash is different from the version stored on the
FC I/O blade, the library will automatically install the firmware image from the
LCB compact flash onto the FC I/O blade. This RAS ticket is generated when
this FC I/O blade firmware update process fails.
Autolevel procedure was not successful. Autoleveling is retried twice before
this ticket is generated.
• Firmware image on the LCB is corrupted.
• Firmware error on the LCB.
Perform DR067 - Resolve FC I/O Blade Auto-Level Failure
Note: Read and perform all resolution steps before dispatching any parts.
Dispatch the first part listed below for replacement. If this does not solve the
problem, dispatch the second part, and so on, in order. Dispatch only one part
(or set of parts) at a time.
1 FC I/O Blade
on page 397.
Troubleshooting the Tape Library