Charging The Battery - Motorola MC17 Product Reference Manual

Battery Door
Properly Aligned
Inspect Battery Door Alignment
Figure 1-13
Secure the battery cover with the Torx screw using a T8 Torx drive.
16.
Secure Battery Cover with Screw
Figure 1-14
Torque the screw to 3.3 ± 0.3 kgf/cm (2.86 ± 0.26 in-lbs.).
17.
NOTE When installing a new battery or performing an OS Update, wait approximately one minute before inserting the
MC17 into a cradle.
Run the battery service procedure. See
18.

Charging the Battery

CAUTION Ensure that you follow the guidelines for battery safety described in
10-1.
NOTE Charge time is based upon the following; WLAN radio is set to maximum power mode, WLAN is associated
with an Access Point and display backlight set to 25% brightness.
Before using the mobile computer for the first time, charge the battery. The battery fully charges in approximately
five hours.
To charge the battery:
Ensure the Charging cradle is connected to the appropriate power source. See
1.
for more information.
Insert the mobile computer into a cradle.
2.
Clearing the Battery on page 10-2
Getting Started 1 - 11
for information.
Battery Safety Guidelines on page
Chapter 8, Cradle Installation