Cleaning Rollers In The Adf - Oki MC873dn Maintenance Manual

Oki Data CONFIDENTIAL

5.5 Cleaning Rollers in the ADF

If the document feeding rollers in the ADF are contaminated with ink, toner particles
or paper dust, documents and outputs get dirty and a paper jam may occur. To
prevent these problems, it is recommended to clean the rollers once a month.
(1) Power off the MFP .
(2) Pull the open lever and open the ADF cover.
45850101TH Rev.1
(3) Wipe the document feed roller, guide surface, and retard roller with a soft
cloth that has been slightly moistened with water and squeezed well. Wipe
the whole surface of the roller while turning it with your hand.
Note! If the rollers get too dirty, wipe them with a soft cloth lightly moistened
with neutral detergent, and then wipe it again with a soft cloth lightly
moistened with water.
guide surface
(4) Open the inner Cover.
5. REGULAR MAINTENANCE
Document feed roller
Retard roller
5-9