Oki MC873dn Maintenance Manual page 53

Oki Data CONFIDENTIAL
No. Category PJL Status Panel messages
Code
133 Error 40502(Y) Incompatible
684 40503(M) %COLOR% Image
685 40504(C) Drum.
686 40501(K)
687 Press the [Details]
button for help.
45850101TH Rev.1
Description
The signature ID of image drum can not be
recognized (Unauthorized third party).
As probable missing to measure the amount of
drum, the printer notifies error status and stop
printing.
Error 684 : Y
Error 685 : M
Error 686 : C
Error 687 : K
Four following behavior is carried out by mode of
operation.
1.Only warning display .(This error is not
displayed).
2.Warning status takes effect at Cover Open/
Close.
3.With no automatic concentration compensation .
4.This error is displayed and it stops.
When this error occurs in more than one color
drums, the all drums that have this error status
and a high most priolity error code are displayed.
(Example)
When this error occurs in all drums: YMCK Drum
Regional Mismatch: 684
When this error occurs in MC drums: MC Drum
Regional Mismatch: 685
No. Category PJL Status Panel messages
Code
134 Error 40506(Y) %COLOR% Image
694 40507(M) Drum Not Installed.
695 40508(C)
696 40505(K) Press the [Details]
697 button for help.
135 Error 40422(2nd Output Tray (or
480 Bin) Upper Output Tray)
(FaceDown) 40075(1st Full.
485 (2ndBIN) Bin)
136 Error - Changing
Language.
Please wait.
137 Error - Language Change
Failed .Error num：
%CODE%
138 Error Cannot print
because your
account balance is
0.
User name:
%USERNAME%
PC Print job:
%DOCUMENTNAME%
To continue the
print job, add the
balance and select
[Restart Print].
For canceling the
print job, select
[Cancel Print].
139 Error #N/A!
2. TROUBLESHOOTING PROCEDURES
Description
The image drum is not installed.
Error 694 : Y
Error 695 : M
Error 696 : C
Error 697 : K
Four following behavior is carried out by mode of
operation.
1.Only warning display .(This error is not
displayed).
2.Warning status takes effect at Cover Open/
Close.
3.With no automatic concentration compensation .
4.This error is displayed and it stops.
1st Bin or 2nd Bin is stacked full. Remove the
paper.
It is during a language change. Wait for a while.
During this message indication, the operation
except the shut down button becomes invalid
Language change failed. It is necessary to Pow-
Off and Pow-On.
Indicating that the job can't be printed because
there are no balances of the account the job is
using.
Indicating that when reading by ADF, the ADF
unit was opened.
2-28