Oki MC873dn Maintenance Manual page 45

Oki Data CONFIDENTIAL
No. Category PJL Status Panel messages
Code
21 Error 40903 (Y) %COLOR% Toner
610 40904 (M) cartridge not
611 40905 (C) installed.
612 40902 (K)
613 Press the [Details]
button for help.
22 Error 40960 (Y) Image Drum
540 40961 (M) Sensor Error
541 40962 (C) %COLOR% Check
542 40959 (K) Image Drum.
543
Press the [Details]
button for help.
23 Error 30089 Multiple sheets of
401 paper have been
fed.
Reset Paper in
%TRAY%.
Press the [Details]
button for help.
24 Error 30034 Paper Size Error.
400 Reset Paper in
%TRAY%.
Press the [Details]
button for help.
25 Error 40077 Paper jam has
390 occurred.
Open the front
cover and remove
the paper.
Press the [Details]
button for help.
45850101TH Rev.1
Description
The toner cartridge is not installed.
Error 610 : Y
Error 611 : M
Error 612 : C
Error 613 : K
Four following behavior is carried out by mode of
operation.
1.Only warning display .(This error is not
displayed).
2.Warning status takes effect at Cover Open/
Close.
3.With no automatic concentration compensation
.
4.This error is displayed and it stops.
Something is wrong with the toner sensor.
This status is indicated in Shipping Mode only.
If the same error is detected in FACTORY Mode,
it is indicated as service call of 163.
Error 540 : Y
Error 541 : M
Error 542 : C
Error 543 : K
Warns that inappropriate long paper has been
fed from the tray. Check whether Multi-feed has
happened. Recovery Print takes place at Cover
Open/Close, allowing the operation to continue.
Inappropriate size paper was fed from a tray.
Check the paper in the tray or check for Multiple-
feed. Open and close the cover to perform
recovery printing, and continue.
Paper Jam occurred during paper feeding from
tray.
Error 390 : MP Tray
No. Category PJL Status Panel messages
Code
26 Error 40077 Paper jam has
391 occurred.
392 Pull out the
393 %TRAY% cassette
394 and then remove
the paper.
Press the [Details]
button for help.
27 Error 40982 Paper jam has
380 occurred.
Open the front
cover and remove
the paper.
Press the [Details]
button for help.
28 Error A paper jam has
381 40078 occurred under the
382 40079 image drum.
383 40051 Remove Paper.
385 40820
389 40819 Press the [Details]
384 40918 button for help.
29 Error 40052 A Paper Jam has
370 40053 occurred and paper
371 40055 remains near the
373 Duplex Unit.
Remove Paper.
Press the [Details]
button for help.
30 Error 40054 Paper jam has
372 occurred.
Open the front
cover and remove
the paper.
Press the [Details]
button for help.
31 Error 40980 The 2-Sided
360 Printing unit is not
set correctly.
Press the [Details]
button for help.
2. TROUBLESHOOTING PROCEDURES
Description
Paper Jam occurred during paper feeding from
tray.
Error 391 : Tray1
Error 392 : Tray2
Error 393 : Tray3
Error 394 : Tray4
Jam has occurred in paper path.
Error 380 : Feed
Jam has occurred in paper path.
Error 381 : Transport
Error 382 : Exit
Error 383 : Duplex Entry
Error 385 : Paper Around Fuser
Error 389 : Printing Page Lost
Error 384 : Upper Output Tray
Jam has occurred nearby DUPLEX unit.
Error 370 : Duplex Reversal
Error 371 : Duplex Input
Error 373 : Duplex Multifeed
Jam has occurred nearby DUPLEX unit.
Error 372 : Misfeed from Duplex
Refer to 2.5.5
Duplex unit is open (removed).
This message is displayed the duplex unit is
removed under the error status (Paper Jam,
cover opend e.t.c.) occurred.
If the duplex unit is removed without error status,
"Inspection is required. 181：Fatal Error" is
displayed.
2-20