Oki MC873dn Maintenance Manual page 237

Oki Data CONFIDENTIAL
4) Gear-Double(Z46-34)
HARVES MDF-1207 all around
Apply HARVES MDF-1207) to all around
of Gear-Double(Z46-34),
especially helical gear teeth of gear
5) Gear-TL-Sep
EM-D110 Class B
Apply Class A of MOLYKOTE (EM-D110)
to the hatched area.
Washer-A
45850101TH Rev.1
Gear-TL-Sep
6) Gear
Apply to 1 place with range 10mm or more.
(The application place is arbitrary)
It is application to a state without a lump jumping
out of an Gear tooth top, the tooth bottom.
10mm or more
Gear-Double(Z46-34)
(Spur gear only)
For detail
Gear-Idle(Z47)
Apply Class C of MOLYKOTE (EM-30LP) to each gear of parts below.
(For 1 place on the gear tooth) (Refer to detail)
1. Gear-WT-Z30 x 2
2. Gear-Coupling(Z26)
3. Gear-Double(Z41-26) x 2
4. Gear-TL-Sep
5. Gear-Idle(Z47)
6. Gear-Double(Z46-34)
4. REPLACEMENT OF PARTS
Gear-Double(Z41-26)
Gear-TL-Sep
Gear-WT-Z30
Gear-Coupling(Z26)
4-87