Front Cover Assy - Oki MC873dn Maintenance Manual

Oki Data CONFIDENTIAL

4.2.17 Front cover Assy.

(1) Pull the cassette ① out of the MFP .
①
(2) Remove the image drum unit/belt unit. (Refer to section 4.2.1)
(3) Detach the cover side-L Assy. (Refer to section 4.2.3)
(4) Detach the Plate-shield. (Refer to section 4.2.8)
(5) Disconnect the FFC cable ② from the main board Assy., release the clamp that is
holding the FFC cable ② , and disconnect the FFC cable ② from the main unit.
(6) Disconnect the Cable ③ and the Cable ④ .
(7) Release the two stays ⑤ .
(8) Remove the screw (silver) ⑥ to estrange the FG cable from the main unit.
(9) Pull the support of the front covert Assy. ⑦ out of the post of the main unit and
detach the front cover Assy. ⑦ .
45850101TH Rev.1
⑤
⑤
④
⑦
③
FG cable
4. REPLACEMENT OF PARTS
Main board
FG cable
⑥
②
④
4-37