Oki Data CONFIDENTIAL
4.2.10.4 ADF-unit / CONN Cord / Film-Guard(L) / Film-
Guard(R)
(1) Remove the cover-ADF-R. (See 4.2.10.1)
(2) Disconnect a connector of the CONN Cord ① from the ADF relation board(7RL),
remove the screw (silver, No:42920406) ② and FG cable of the CONN Cord ① ,
and disconnect each cables ③ of two moters, and detach those cables from the
groove of the ADF-unit ④ .
(3) Remove two screws (black: 42932710) ⑤ .
45850101TH Rev.1
②
FG cable
③
④
Connector
①
⑤
⑤
(4) Open the ADF-unit ④ while pushing the portion A.
④
A
4. REPLACEMENT OF PARTS
4-17