Oki MC873dn Maintenance Manual page 36

Oki Data CONFIDENTIAL
No. Category PJL Status Panel messages
Code
14 Warning 10970 (Y) %COLOR% Please
10971 (M) install new Image
10972 (C) Drum Unit.
10969 (K) Image Drum Life.
Press the [Details]
button for help.
15 Warning 10692 (Y) %COLOR%
10693 (M) Replace the image
10694 (C) drum. %PAGES%
10691 (K) Pages Left.
Press the [Details]
button for help.
16 Warning 10686 (Y) %COLOR%
10687 (M) Replace the image
10688 (C) drum. Print Quality
10685 (K) Not Guaranteed.
Press the [Details]
button for help.
17 Warning 10053 Belt Reflex Error
18 Warning 10887 Density Shutter
Error2
19 Warning 10886 Density Shutter
Error1
20 Warning 10885 Density Color
Calibration
45850101TH Rev.1
Description
Notifies the life of the drum. This is a warning
only.
This appears when the cover was opened and
closed just after the drum life error occurred.
%COLOR%
Y
M
C
K
Notifies the prolonged period of the image drum
life, after reached its limitation, by the operator's
requirement.
Notifies the last prolonged period of the image
drum life.
This appears after the hidden operation was done
at the life limitation.
Belt Reflex Check Error.
PU firmware does not notify this warning to CU
firmware at the time of Shipping Mode. Therefore,
this status does not occur in a user environment.
Density Adjustment Shutter Error 2.Error that
does not occur at user level.Displayed only in
FactoryMode.
PU firmware does not notify this warning to CU
firmware at the time of Shipping Mode. Therefore,
this status does not occur in a user environment.
Density Adjustment Shutter Error 1.Error that
does not occur at user level.Displayed only in
FactoryMode.
PU firmware does not notify this warning to CU
firmware at the time of Shipping Mode. Therefore,
this status does not occur in a user environment.
Density Adjustment Color Calibration Error.Error
that does not occur at user level.Displayed only in
FactoryMode.
PU firmware does not notify this warning to CU
firmware at the time of Shipping Mode. Therefore,
this status does not occur in a user environment.
No. Category PJL Status Panel messages
Code
21 Warning 10884 Density Color
Sensor Error
22 Warning 10883 Density Black
Calibration
23 Warning 10882 Density Black
Sensor Error
24 Warning 10976 %COLOR% Image
Drum Smear Error
25 Warning 10975 %COLOR% Low
Density Error
26 Warning 10054 Sensor Calibration
Error
2. TROUBLESHOOTING PROCEDURES
Description
Density Adjustment Color Sensor Error.Error that
does not occur at user level.Displayed only in
FactoryMode.
PU firmware does not notify this warning to CU
firmware at the time of Shipping Mode. Therefore,
this status does not occur in a user environment.
Density Adjustment Black Calibration Error.Error
that does not occur at user level.Displayed only in
FactoryMode.
PU firmware does not notify this warning to CU
firmware at the time of Shipping Mode. Therefore,
this status does not occur in a user environment.
Density Adjustment Black Sensor Error.Error that
does not occur at user level.Displayed only in
FactoryMode.
PU firmware does not notify this warning to CU
firmware at the time of Shipping Mode. Therefore,
this status does not occur in a user environment.
Density Adjustment ID ERROR 2; smear due to
ID failure.
PU firmware does not notify this warning to CU
firmware at the time of Shipping Mode. Therefore,
this status does not occur in a user environment.
%COLOR%
Y
M
C
K
Density Adjustment ID ERROR; LED out of focus
is assumed.
PU firmware does not notify this warning to CU
firmware at the time of Shipping Mode. Therefore,
this status does not occur in a user environment.
%COLOR%
Y
M
C
K
When output of color registration sensor is below
reference value.
PU firmware does not notify this warning to CU
firmware at the time of Shipping Mode. Therefore,
this status does not occur in a user environment.
2-11