Oki MC873dn Maintenance Manual page 51

Oki Data CONFIDENTIAL
No. Category PJL Status Panel messages
Code
109 Error 30936 Unauthorized Scan
Error Code: X01
110 Error A decoding error
occurred.
Check the image
data.
111 Error - USB Memory
disconnected.
112 Error - Cannot open the
file.
113 Error - Cannot read the
file.
114 Error 40565 Document jam has
occurred.
Open the automatic
document feeder
(ADF) cover on the
scanner to check.
<%CODE%>
Press the [Details]
button for help.
115 Error 40585 Printing was
409 stopped. Rear
Output Tray was
opened during
printing.
Open the Output
Tray.
Error code: 409
116 Error - Insufficient memory
occurred during
Fax Tx reservation.
117 Error - Insufficient
memory.
45850101TH Rev.1
Description
Notifies that a particular pattern is detected
(banknote detection) during scanning for
photocopy.
The message shall be written in English even
when the MFP is bound for Japan.
The exact words shall be displayed and they shall
not be shortened.
The message shall not be translated into any
other languages.
Indicates that the USB memory is disconnected
while PrintFromUSBMemory is running. Reading
of the image file is cancelled.
Notifies that the specified file cannot be opened.
Notifies that processing has failed, for instance,
because of a fault in the equipment in which the
data was to be stored.
At machine initial time (power-on, restoration time
from sleep), a manuscript was detected on a set
sensor.
Indicates that an error has occurred as the faceup
stacker was operated during printing and printing
stopped.
The same type of status as STATUS_ID_FAX_
S_MEMORY_OVERFLOW Indicates that memory
overflow has occurred during ScanToFax.
Similar error to STATUS_ID_FAX_S_MEMORY_
OVERFLOW
Indicates that memory overflow has occurred
while fax is being received.
No. Category PJL Status Panel messages
Code
118 Error 40596
(ONLINE)
119 Error 40597
(ONLINE)
120 Error - Wireless startup
517 failed.
Please see Help for
details.
121 Error - This wireless
firmware version
does not operate
on this device.
Please see Help for
details.
122 Error - Wireless settings
are incomplete.
Please see Help for
details.
123 Error - Not connected to
wireless access
point.
Please see Help for
details.
124 Error 40427 Firmware Update
Error
Please try again.
If network doesn't
work, please try
firmware update
over USB.
125 Error - Use genuine
410 %COMPANY_
411 NAME%
412 consumables for
413 max performance.
+
Information
2. TROUBLESHOOTING PROCEDURES
Description
This should be appeared after the
toner empty error messages when
OKIORIGINALCONSUMABLEDISPLAY is ON to
display this.
2-26