Network Interface Specification - Oki MC873dn Maintenance Manual

Oki Data CONFIDENTIAL

1.5.2 Network Interface Specification

1.5.2.1 Outline of Network Interface
Refer to the contents of 1.4 Specifications.
1.5.2.2 Network Interface Connector and Cable
(1) Connector
1000Base-T/100 BASE-TX/10 BASE-T
(automatic switch, no simultaneous use)
1
Connector pin arrangement
(2) Cable
Unshielded twist pair cable with RJ-45 connector
(Category 5e or higher-order is recommended.)
45850101TH Rev.1
8
1.5.2.3 Network Interface Signal
Pin No. Signal name
1 TRD+(0)
2 TRD-(0)
3 TRD+(1)
4 TRD+(2)
5 TRD-(2)
6 TRD-(1)
7 TRD+(3)
8 TRD-(3)
1. CONFIGURATION
Functions
Transmit and receive Data 0 (+)
Transmit and receive Data 0 (-)
Transmit and receive Data 1 (+)
Transmit and receive Data 2 (+)
Transmit and receive Data 2 (-)
Transmit and receive Data 1 (-)
Transmit and receive Data 3 (+)
Transmit and receive Data 3 (-)
1-17