Oki MC873dn Maintenance Manual page 179

Oki Data CONFIDENTIAL
4.2.12 2bin Assy. / Guide Assy.-2Bin / Stacker Assy.-2Bin
(1) Remove the Cover-side-L, Cover-rear and Plate-shield. (Refer to section 4.2.8)
(2) Open the Guide-2bin-rear and remove the four claws and 2bin-Cover ① .
claw
❷
push
(3) Remove the five separators ② arrenged inside of the Guide-2bin-rear. (refer to
fig.4.2.12(1))
(4) Disconnect the cable ③ .
(5) Remove the four screws ④ and 2bin-Assy ⑤ .
Notes on assembling:
When assembling the separators, pay attention to the position.(Refer to the
following figure)
② ②
45850101TH Rev.1
①
Guide-2bin-rear
❶
push
claw
② ②
fig.4.2.12(1)
④
×4
Ⓐ
②
4. REPLACEMENT OF PARTS
③
①
Ⓐ
4-29