Maintenance Utility - Oki MC873dn Maintenance Manual

Oki Data CONFIDENTIAL

3.3 Maintenance Utility

The adjustments described in table 3-1 should be made by using Maintenance Utility. Details
on the utility are as follows:
(1) Maintenance Utility operation manuals:
42678821FU01 Rev.2 (Version 1.1.0) or higher (Japanese)
42678821FU02 Rev.2 (Version 1.1.0) or higher (English)
(2) Maintenance Utility program:
Applicable operating
File name
system
Win XP/Vista/7/8 42678821FW01.zip 42678821FW01 Rev.2
Table 3-1 Maintenance Utility Adjustment Items
Item Adjustment
1 Board Copies the information from the
Replace- EEPROM on the PU board, and copies
ment the EEPROM setting value on CU
board.
Purpose: To copy the information
stored on the EEPROM on the PU or
CU board when the CU/ or PU board
needs to be replaced with another one
due to maintenance.
2 Serial Rewrites the serial number recorded
number on the PU, and Selects the printer
setting serial number recorded on the CU,
output mode, and rewrites the device
serial number.
Purpose: To configure a maintenance
replacement board to which the
information on the PU board cannot be
copied (due to an interface error).
45850101TH Rev.1
Part number
(Version 2.1.0) or higher
Section in
Operation from
Maintenance
operator panel
Utility
(section in this
Operation
maintenance manual)
manual
3.1.1 Unavailable
3.2.1 Unavailable
Item Adjustment
3 Factory/ Switches between Factory and
Shipping Shipping modes.
Mode Purpose: To configure a maintenance
replacement PU board to which the
information on the EEPROM on the
PU board cannot be copied (due to an
interface error). The maintenance board
is set to the Factory mode usually by
default and, by using this function, must
be set to the Shipping mode.
4 Mac Sets the Mac address
address
setting
5 Network log Stores Network log files.
storage
6 Send File Transmits a specified file.
7 PU log Stores PU log flies.
storage
8 Test print Executes the local print function and
sends a specified file.
Purpose: To check the printer on
a stand-alone basis and send a
download file.
9 Local Print Stores files of local print data
Data storage
10 PU Stores self-diagnosis log files of printer
maintenance paper running system.
log storage
11 Migrate Copy to another device by selecting
Settings any values of various settings.
12 FUSE KEEP Sets the FUSE KEEP mode.
mode setting
3. MAINTENANCE MENUS
Section in
Operation from
Maintenance
operator panel
Utility
(section in this
Operation
maintenance manual)
manual
3.2.3 Section 3.4.10
3.2.2 Unavailable
3.3.1 Unavailable
3.1.2 Unavailable
3.3.2 Unavailable
3.4 Perform local printing
(refer to System
Specification
3.3.4 Unavailable
3.3.3 Unavailable
3.1.3 Unavailable
3.2.7 Unavailable
3-13