Removing The Rear Footrests; Removing The Front Footrest Support (Left Side) - APRILIA RS 50 Workshop Manual

Body work
RS 50
Loosen and remove the screws (4) under the pillar
cover.
5
Torque setting for screws (4):
24 Nm (2.4 kgm) [17.7 Ft-lb].
Remove the footrest support (5) complete with foot-
rest.
If necessary, remove the footrest (5) (REMOVING
THE REAR FOOTRESTS).
4

REMOVING THE REAR FOOTRESTS

Read carefully (PRECAUTIONS AND GENERAL
INFORMATION).
Position the motorcycle on the stand.
CAUTION
Wait until the engine and exhaust muffler cool
down completely.
Remove the retainer ring (1).
7
Withdraw the pin (2).
WARNING
Be careful not to lose the ball (3) pushed out by
the spring (4).
2
3
Remove the footrest (5) and take off the shim (6), ball
6
(3) and spring (4).
4
5
NOTE
If necessary, repeat the procedure for the
removal of the otherfootrest.
1
REMOVING THE FRONT FOOTREST
SUPPORT (LEFT SIDE)
Read carefully (PRECAUTIONS AND GENERAL
INFORMATION).
Position the motorcycle on the stand.
CAUTION
Wait until the engine and exhaust muffler cool
down completely.
7-25
ch. 7
Release 00 2001-03