Removing The Front Footrest; Removing The Shift Lever - APRILIA RS 50 Workshop Manual

Body work
RS 50

REMOVING THE FRONT FOOTREST

Read carefully (PRECAUTIONS AND GENERAL
INFORMATION).
Position the motorcycle on the stand.
CAUTION
Wait until the engine and exhaust muffler cool
down completely.
Remove the retainer ring (1). 2
Withdraw the pin (2).
Take off the footrest (3) and the spring (4).
NOTE
If necessary, repeat the procedure to remove
the other front footrest.
4
3
1

REMOVING THE SHIFT LEVER

7
Read carefully (PRECAUTIONS AND GENERAL
INFORMATION).
Position the motorcycle on the stand.
Loosen and remove the nut (5).
Torque setting for nut (5):
5 Nm (0.5 kgm) [3.7 Ft-lb].
5
Loosen and remove the gear shift lever (6).
9
8
Torque setting for shift lever pin (6):
7
12 Nm (1.2 kgm) [8.8 Ft-lb].
Remove the 2 Belleville washers (7), the washer (8)
and the nut (9).
Remove the shift lever (10).
6
10
7-27
ch. 7
Release 00 2001-03