Removing The Front Footrest Support (Right Side) - APRILIA RS 50 Workshop Manual

Body work
RS 50
Remove the shift lever (1) (REMOVING THE SHIFT
LEVER).
3
Loosen and remove the screws (2).
Torque setting for screws (2):
25 Nm (2.5 kgm) [18.4 Ft-lb].
2
Remove the front footrest support (3) complete with
4
footrest (4).
If necessary, remove the front footrest (4) (REMOV-
ING THE FRONT FOOTREST).
1
REMOVING THE FRONT FOOTREST
SUPPORT (RIGHT SIDE)
Read carefully (PRECAUTIONS AND GENERAL
INFORMATION).
Position the motorcycle on the stand.
CAUTION
Wait until the engine and exhaust muffler cool
down completely.
Remove the brake pedal (5) (REMOVE THE BRAKE
7
PEDAL).
Loosen and remove the screws (6).
6
Torque setting for screw (6):
10 Nm (1.0 kgm) [7.4 Ft-lb].
10
Temporarily attach the rear brake master cylinder (7)
8
to the frame in a vertical position, using adhesive
tape.
5
9
Loosen and remove the screws (8).
Torque setting for screws (8):
25 Nm (2.5 kgm) [18.4 Ft-lb].
Remove the front footrest support (9), complete with
footrest.
If necessary, remove the front footrest (10) (REMOV-
ING THE FRONT FOOTREST).
7-26
ch. 7
Release 00 2001-03