APRILIA RS 50 Workshop Manual page 154

Body work
RS 50
Loosen and remove the screw (9).
Torque setting for screw (9):
12 Nm (1.2 kgm) [8.8 Ft-lb].
Take off the washer (10).
10
9
The exhaust pipe must be supported during this
13
operation.
11
Loosen and remove the screw (11).
Torque setting for screw (11):
12 Nm (1.2 kgm) [8.8 Ft-lb].
12
Take off the washer (12).
WARNING
Plug the exhaust pipe opening, to prevent foreign
material from entering.
Withdraw the exhaust pipe (13) in a downward direc-
tion.
Clean if necessary (CLEANING THE EXHAUST PIPE
AND MUFFLER).
7
7-29
ch. 7
Release 00 2001-03