Disassembling The Swing Arm - APRILIA RS 50 Workshop Manual

Body work

DISASSEMBLING THE SWING ARM

Read carefully (PRECAUTIONS AND GENERAL
INFORMATION).
Remove the bushes (1).
Remove the O-rings (2).
WARNING
When reassembling, use 2 new O-rings (2).
Remove the internal spacer (3).
Using a drift of suitable diameter, remove the internal
bushes (4).
NOTE
Wash all components with clean detergent.
WARNING
When refitting the internal bushes (4), use a jig of
suitable diameter.
CHECKING THE COMPONENTS
WARNING
Ensure that none of the components show any
signs of bending, cracking, or denting. Replace
any damaged components.
GASKETS
Check the condition of the gaskets; replace them if
they show any signs of damage or excess wear.
ch. 7
1
2
4
3
Release 00 2001-03
RS 50
1
4
2
7-71
7