APRILIA RS 50 Workshop Manual page 107

Electrical system
RS 50
TECHNICAL DATA
Direction indicator
bulbs .......................................... 12 V - 10 W B.A. 15 S
Flasher ...................................................... 12 V - 22 W
All-glass type direction indicator
warning light bulbs ................. 12 V - 2 W - W2.1x9.5d
TROUBLESHOOTING
A. INDICATORS DON'T WORK
Check the bulbs.
Check the wiring connections.
Check the turn signal selector.
Check the general power supply circuit.
Replace the flasher.
B. INDICATORS STAY LIT PERMANENTLY, WITH-
OUT FLASHING
Check bulb specifications.
Check the battery (CHECKING THE BATTERY).
Replace the flasher.
CHECK DATA
CHECKING THE DIRECTION INDICATOR SELEC-
TOR
Check the continuity of the bulbs.
Disconnect the selector connector.
Using a multimeter with the scale set to ohms, check
the continuity between the wires in the different
positions by testing the connections see (MAIN
WIRING DIAGRAM).
6-14
ch. 6
Release 00 2001-03