APRILIA RS 50 Workshop Manual page 173

Body work
NOTE
Before completely removing the spring (5),
hold it just out of the tube (6) for a few seconds so that
part of the oil runs down into the tube.
Remove the spring (5).
Turn the fork upside down and pour the oil out into a
container (7). This takes several seconds, be patient.
Place the fork in the vice between the 2 jaws (A),
gripping the slider.
Using a socket wrench (8), loosen and remove the
plunger retainer screw (9).
Remove the copper washer (10).
Remove the dust cover seal (11) by prying it off evenly
with a screwdriver. Be careful not to distort the slider
or to scratch the fork tube.
7-48
Release 00 2001-03
6
A
9
8
ch. 7
RS 50
5
7
10
11